2. INSTALLATION Connect the individual components as shown. - Solar panel(s) - Battery and loads in order indicated Install the regulator near the battery. The installation environment should be indoor, dry and nonflammable. The cables should be as short as possible and. Market trends for floating solar 11 Key phases of a floating solar project 13 2 SITE IDENTIFICATION 17 Introduction 17 Solar irradiance and climate conditions 18 Bathymetry and water body characteristics 19 Soil investigations and water analysis 21 Shading, soiling, and environmental considerations Installation and User Manual-GG_IEC_EN__Vpdf; Notification_Certificates of lighter Glass-Glass modules and installation of Glass-Backsheet modules Download (INT) Product and system instructions Yingli Solar is one of the world's leading solar panel manufacturers. Our mission is to provide affordable green energy for all.
Solar modules have electrical been listed as Class C loads according to UL standard. The fire rating of this module manner valid only when mounted in the modules, manner in system. the mechanical mounting instructions. CAUTION: fixed In water any case DO module NOT STAND OR STEP on the as localized high may induce severe micro ‐ cracks do. SAFETY AND INSTALLATION MANUAL FOR PHOTOVOLTAIC MODULES Fig. 5a: allowed positions for fixing SLA/SSA modules using mounting clamps. Fig. 5b: allowed positions for fixing SLG/SSG modules using mounting clamps. ATTENTION: in the case of installation with modules in the portrait configuration, install the modules with the junction boxes at the. • Solar module installation and maintenance must be performed by qualiied and authorized installer. • All installation instructions should be read and understood before performing any installation. • Do not disassemble the solar module. • After installation or repair, check that the solar module are operating properly.
This general manual provides important safety information relating to the installation, maintenance and handling of CS-series solar modules. Professional installer must read these guidelines carefully and strictly follow these instructions. Failure to follow these instructions may result in death, injury or property damage. The installation. Canadian solar modules have been qualified for Application Class A (equivalent to Safety Class II requirements). Modules rated under this class should be used in systems operating at voltage above 50V or power above W, where general contact access is anticipated. Canadian Solar modules have been certified as Type 1. information relating to the installation, maintenance and handling of CS-series solar modules. Professional installer must read these guidelines carefully and strictly follow these instructions. Failure to follow these instructions may result in death, injury or property damage. The installation and handling of PV modules.
0コメント